Keep Your Construction Site Safe with Ground Faults Protection

According to the National Institute of Safety and Health, the most frequently cited Occupational Safety and Health Administration (OSHA) electrical violation is improper grounding of equipment or circuits. This is especially troubling for construction managers in light of the fact that construction workers suffer more electrical burns and fatal electrical injuries than workers in all other industries combined. Each incident carries significant costs in terms of lost time and resources and increases the employer’s risk of costly lawsuits. The most unfortunate aspect of this threat is that many of these accidents could have been prevented with the implementation of proper ground fault protection practices.

GDI Insurance Agency, Inc. provides California contractors insurance solutions specifically-tailored for construction businesses.

We include the following for our clients:

OSHA Regulations

electrical wiring

OSHA requires employers to provide at least one of the following:

  • Ground fault circuit interrupters (GFCIs) on construction sites for receptacle outlets in use and not part of the permanent wiring of the building or structure
  • A scheduled and recorded Assured Equipment Grounding Conductor Program (AEGCP), covering all cord sets, receptacles not part of the permanent wiring of the building, and equipment connected by cord and plug

Social Landing Page Graphic (6)

About GFCIs

Grounding a tool or electrical system involves creating a low-resistance electrical path that connects to the earth. A ground-fault occurs in a tool or electrical system when there is a break in this low-resistance grounding path. The electrical current may then take an alternative path to the ground through the user, resulting in serious injuries or death. GFCIs automatically limit or stop the flow of current in the event of a ground fault, overload or short circuit in the wiring system. They operate by monitoring the amount of current going into electric equipment and the amount of current flowing out along the circuit conductors. If the difference exceeds 5 milliamperes, the device automatically shuts off the power to prevent injury.

About AEGCPs

The OSHA-approved alternative to using GFCIs on a construction site is an AEGCP, which is a regimented system for testing electrical tools and extension cords to assure their proper ground fault protection. If an AEGCP is used in place of GFCIs for ground fault protection, the following minimum requirements apply:

  • Keep a written description of the program at the jobsite. Outline specific procedures for the required equipment inspections, tests and test schedule, and make them available to OSHA and to affected persons upon demand.
  • Designate one or more competent persons to implement the program. OSHA defines a competent person as someone who is qualified to identify hazards and authorized to take prompt corrective measures.
  • Visually inspect all cord sets, attachment caps, plugs and receptacles, and any equipment connected by cord and plug, before use each day. If you see any external damage—such as deformed or missing pins, or damaged insulation—or discover internal damage, take the equipment out of use until it is repaired.
  • Perform two OSHA-required tests on all electrical equipment, a continuity test, and a terminal connection test. These tests are required under the following circumstances:
  • Before first use
  • After any repairs, and before placing back in service
  • After suspected damage, and before returning to use
  • Every 3 months
  • Maintain a written record of the required tests, identifying all equipment that passed the test and the last date it was tested (or the testing interval). Like the program description, make it available to OSHA inspectors and affected persons upon demand.

Using GFCIs in Conjunction with AEGCPs

Although OSHA permits the use of an AEGCP in lieu of GFCIs, it would be a mistake to view the choice as strictly an either/or proposition. The best course of action is to use GFCIs in conjunction with an Assured Equipment Grounding Conductor Program. Taking this step will not eliminate the possibility of a costly electrical accident on the worksite, but it will significantly reduce the risk of injury or death due to ground faults.

California’s Leader in Insurance and Risk Management

As one of the fastest growing agencies in California, GDI Insurance Agency, Inc. is able to provide its clients with the latest and greatest of what the insurance industry has to offer and much, much more. With locations across the heart of California’s Central Valley and beyond to provide a local feel to the solutions and services we provide our clients. We pride ourselves on exceeding our client’s expectations in every interaction to make sure that our client’s know how much we value and appreciate their business.  Contact us today 1-209-634-2929 for your comprehensive contractors insurance quote!